 American Graphtec CB09U 30° |
Blade for use in the blue holder for cutting thin (ie: tint, gold leaf, etc.) materials and large letters.
|
|
|
|
|
|
|
| American Graphtec CB09U 30° 5 pack |
5 pack American Graphtec 30°
|
|
|
|
|
|
|
| American Graphtec CB09U 45° |
 Steel tip applied to solid premium grade carbide. Precision ground and polished cutting edge. Springs are available on request.
|
|
|
|
|
|
|
| American Graphtec CB09U 45° 5 pack |
 5 packs of the American Graphtec CB09U with 1 extra spring.
|
|
|
|
|
|
|
| American Graphtec CB09U 60° |
 Hardened steel tip brazed to solid premium grade carbide. Precision ground and polished cutting edge. Springs available on request.
|
|
|
|
|
|
|
| American Graphtec CB09U 60° 5 pack |
 5 packs of the American Graphtec CB09U 60° with 1 extra spring
|
|
|
|
|
|
|
| American Graphtec CB15U 30° |
For use with red holder. Cuts thinner materials and large letters.
|
|
|
|
|
|
|
| American Graphtec CB15U 30° 5 pack |
5 pack American Graphtec CB15U 30°
|
|
|
|
|
|
|
| American Graphtec CB15U 45° |
 1.5 MM blades with a metal bushing
|
|
|
|
|
|
|
| American Graphtec CB15U 45° 5 pack |
 5 packs of the American Graphtec CB15U 45°
|
|
|
|
|
|
|
| American Graphtec CB15U 60° |
 1.5 MM blades with a metal bushing.
|
|
|
|
|
|
|
| American Graphtec CB15U 60° 5 pack |
 5 packs of the American Graphtec CB15U 60°
|
|
|
|
|
|
|
| Anagraph 45° |
 Ultrafine grain carbide tip, brazed to a hardened steel shank.
Fits ANAElite 60, 75, 101, 120.
used primarily for 2-12 mil. vinyl.
|
|
|
|
|
|
|
| Anagraph 45° 5 pack |
 5 packs of the Anagraph 45°
|
|
|
|
|
|
|
| Anagraph 60° |
 Ultrafine grain carbide tip, brazed to a hardened steel shank.
Fits ANAElite 60, 75, 101, 120.
used primarily for 12+ mil. vinyl, reflective and small characters.
|
|
|
|
|
|
|
| Anagraph 60° 5 pack |
5 packs of the Anagraph 60°
|
|
|
|
|
|
|
| Creation P-Cut 45 1.5 MM 5 Pack |
5 pack Creation P-Cut 1.5 MM blades
|
|
|
|
|
|
|
| Creation P-Cut 45 degree 1.5MM |
 ***This is the old size blade all one diameter*** The new OEM blades are steel with a smaller diameter carbide cutting end. If you are not sure call our toll free number.
|
|
|
|
|
|
|
| Creation P-Cut 60 degree 1.5MM |
***This is the old size blade*** The new OEM blades are steel with a smaller diameter carbide cutting end. If you are not sure call our toll free number.
|
|
|
|
|
|
|
| Creation P-Cut 60 degree 1.5MM 5 Pack |
5 Packs of the P-Cut 60 degree blade
|
|
|
|
|
|
|
| EnVision 30 degree |
 Solid premium grade carbide with polished cutting edge.
Fits Gerber enVision, odyssey, and embosstrack
Used with most thinner Mils of vinyl, tint, and larger letters.
|
|
|
|
|
|
|
| EnVision 30° 5 pack |
 5 packs of the 30° to fit EnVsion, Odysee, and Embosstrack.
|
|
|
|
|
|
|
| Envision 45 degree |
 Solid Ultrafine grain carbide. Fits Gerber enVision and odyssey.
used with most Mils of vinyl.
.50 mm offset
|
|
|
|
|
|
|
| Envision 45° 5 pack |
5 packs of the 45° to fit EnVsion, Odysee, and Embosstrack.
|
|
|
|
|
|
|
| EnVision 60 degree |
 Solid Ultrafine grain carbide. Fits Gerber enVision and odyssey.
used with most thicker Mils of vinyl, reflective, and small characters.
|
|
|
|
|
|
|
| Envision 60° 5 pack |
5 packs of the 60° to fit EnVsion, Odysee, and Embosstrack.
|
|
|
|
|
|
|
| Gerber Fastrack 45 degree |
Solid carbide with brass spring collar, also fits Mutoh DX and XP
|
|
|
|
|
|
|
| Gerber Fastrack 45 degree 5 Pack |
5 Pack of the Fastrack 45 degree blade, also fits Mutoh DX and XP
|
|
|
|
|
|
|
| Gerber Fastrack 60 degree |
Solid carbide with brass spring collar, also fits Mutoh DX and XP
|
|
|
|
|
|
|
| Gerber Fastrack 60 degree 5 Pack |
5 Pack of the Fastrack 60 degree blade with brass spring collar, also fits Mutoh DX and XP
|
|
|
|
|
|
|
| Gerber Flat 30 degree |
 Solid ultrafine grain carbide, fits Gerber, Anagraph Exel 1/1m, and Compugraphic Arty.
Used primarily for 2-4 Mil. vinyl
|
|
|
|
|
|
|
| Gerber flat 30° 5 pack |
 5 packs of the 30° flat Gerber blade.
|
|
|
|
|
|
|
| Gerber Flat 45 degree |
 Solid ultrafine grain carbide, fits Gerber, Anagraph Exel 1/1m, and Compugraphic Arty.
Used primarily for 4-12 Mil. vinyl
|
|
|
|
|
|
|
| Gerber flat 45° 5 pack |
 5 packs of the 45° flat Gerber blade.
|
|
|
|
|
|
|
| Gerber Flat 60 degree |
 Solid ultrafine grain carbide, fits Gerber, Anagraph Exel 1/1m, and Compugraphic Arty.
Used primarily for12+Mil. vinyl. Sandblast mask.
|
|
|
|
|
|
|
| Gerber Flat 60 degree Special |
 Solid ultrafine grain carbide, fits Gerber, Anagraph Exel 1/1m, and Compugraphic Arty.
Used primarily for 1/8" thick foam sandblast mask.
|
|
|
|
|
|
|
| Gerber flat 60° 5 pack |
 5 packs of the 60° flat Gerber blade.
|
|
|
|
|
|
|
| Gerber flat 60° special 5 pack |
 5 packs of the 60° thinned, flat Gerber blade.
|
|
|
|
|
|
|
| Gerber GSX 42° |
Solid carbide with polished cutting edge. Standard with GSX machines. Also fits GS and HS machine swivel blade holders.
|
|
|
|
|
|
|
| Gerber GSX 42° 5 pack |
5 packs of the 42°swivel knife for Gerber GSX
|
|
|
|
|
|
|
| Gerber GSX 60 degree |
 Solid premium grade carbide with polished cutting edge
|
|
|
|
|
|
|
| Gerber GSX 60° 5 pack |
5 packs of the 60°swivel knife for Gerber GSX
|
|
|
|
|
|
|
| Ioline King Cobra |
Solid carbide special for 300 series machines design to cut thicker material for rhinestones.
|
|
|
|
|
|
|
| Ioline King Cobra 5 Pack |
5 pack of king cobra blades for cutting thicker foam materials for rhinestone placement.
|
|
|
|
|
|
|
| Ioline Studio 30 degree |
 Solid ultrafine grain carbide.
Fits Studio 7,8; Artpro 3500, 3700, 4000; and Techno arts switchblade.
Primarily for 2-4 mil. vinyl.
|
|
|
|
|
|
|
| Ioline Studio 30 degree 5 Pack |
5 Pack of the Ioline 30 degree blade
|
|
|
|
|
|
|
| Ioline Studio 45 degree |
 Solid ultrafine grain carbide.
Fits Studio 7,8; Artpro 3500, 3700, 4000; and Techno arts switchblade.
Primarily for 4-12 mil. vinyl.
|
|
|
|
|
|
|
| Ioline Studio 45 degree 5 Pack |
5 Pack of the Ioline 45 degree blade
|
|
|
|
|
|
|
| Ioline Studio 60 degree (Cobra) |
 Solid ultrafine grain carbide.
Fits Studio 7,8; Artpro 3500, 3700, 4000; and Techno arts switchblade.
Primarily for 12+mil. vinyl or Sandblast mask.
|
|
|
|
|
|
|
| Ioline Studio 60 degree (Cobra) 5 Pack |
 5 Pack of the Ioline 60 degree Cobra blade
|
|
|
|
|
|
|
| Ioline Studio 60 degree (non-Cobra) |
Solid ultrafine grain carbide.
Fits Studio 7,8; Artpro 3500, 3700, 4000; and Techno arts switchblade.
|
|
|
|
|
|
|
| Ioline Studio 60 degree 5 Pack |
5 Pack or the Ioline 60 degree blade
|
|
|
|
|
|
|
| Ioline-321 |
 Solid ultra fine grain carbide.
Fits Ioline SS 300
|
|
|
|
|
|
|
| Ioline-321 5 Pack |
 5 Pack of the Ioline 321 blade
|
|
|
|
|
|
|
| Ioline-322 |
 Solid ultrafine grain carbide.
Fits Ioline SS-300
|
|
|
|
|
|
|
| Ioline-322 5 Pack |
 5 Pack of the Ioline 322 blade
|
|
|
|
|
|
|
| Ioline-324 |
Ioline 300 series blade 30° with higher side angle for cutting harder to cut materials, like felt.
|
|
|
|
|
|
|
| Ioline-324 5 Pack |
5 Pack of the Ioline 324 blade
|
|
|
|
|
|
|
| Ioline-326 |
 300 series blade 60° designed for cutting paper patterns or stencils.
|
|
|
|
|
|
|
| Ioline-326 5 Pack |
 5 Pack of the Ioline 326 blade
|
|
|
|
|
|
|
| Mimaki 0001 |
 Solid ultrafine grain carbide. Fits CG series plotters.
Used for 80% of your cutting needs.
37 degree for 2-4 Mil. vinyl.
Fits DGI Plotter .30 mm offset
|
|
|
|
|
|
|
| Mimaki 0001 5 Pack |
 5 Pack of the Mimaki 0001 blade
|
|
|
|
|
|
|
| Mimaki 0003 |
 Solid ultrafine grain carbide. Fits CG series plotters.
Used for small character cutting.
50 degree for 2-4 Mil. vinyl.
Fits DGI Plotter .15 mm offset
|
|
|
|
|
|
|
| Mimaki 0003 5 Pack |
 5 Pack of the Mimaki 0005 blade
|
|
|
|
|
|
|
| Mimaki 0005 |
 Solid ultrafine grain carbide. Fits CG series plotters.
Used for stencil cutting in thicker materials.
56 degree for 4-12+ Mil.
Fits DGI Plotter .75 mm offset
|
|
|
|
|
|
|
| Mimaki 0005 5 Pack |
 5 packs 0005 blade
|
|
|
|
|
|
|
| Mimaki 0030 |
 Solid ultrafine grain carbide. Fits CG series plotters.
Sometimes called the "combo" blade.
50 degree longer cutting edge than 0003 for 2-12 Mil. vinyl.
Fits DGI Plotter .30 offset
|
|
|
|
|
|
|
| Mimaki 0030 5 Pack |
 5 Pack of the Mimaki 0030 blade
|
|
|
|
|
|
|
| Mimaki finished material Cutoff Blade |
Mimaki material cut off blade, does not include the holder.
|
|
|
|
|
|
|
| Mutoh 30 |
Solid premium grade carbide with polished cutting edge.
Used with most thinner Mils of vinyl, tint, and larger letters.
|
|
|
|
|
|
|
| Mutoh 30 5 Pack |
5 packs Mutoh 30
|
|
|
|
|
|
|
| Mutoh XP 45 degree |
Solid premium grade carbide with polished cutting edge.
Use for most of your cutting needs.
|
|
|
|
|
|
|
| Mutoh XP 45 degree 5 Pack |
5 Pack of the Mutoh 45 degree blade
|
|
|
|
|
|
|
| Mutoh XP 60 degree |
Solid premium grade carbide with polished cutting edge
Use for thick vinyl, reflective and other metalized vinyl, and for small letters and graphics
|
|
|
|
|
|
|
| Mutoh XP 60 degree 5 Pack |
5 Pack of the Mutoh 60 degree blade
|
|
|
|
|
|
|
| Roland 30 degree |
 Solid ultrafine grain carbide tip, brazed to a hardened steel shank.
Fits Roland camm1,Allen Datagraph, Graphityp, CSR ecom-2, Stika, GCC, Master, Creation, US Cutter, Vinyl Express not Q series
Primarily for 2-4 Mil. vinyl.
|
|
|
|
|
|
|
| Roland 30 degree 5 Pack |
5 Pack of the Roland 30 degree blade
|
|
|
|
|
|
|
| Roland 45 degree |
 Solid ultrafine grain carbide tip, brazed to a hardened steel shank.
Fits Roland camm1,Allen Datagraph, Graphityp, CSR ecom-2, Stika, GCC, Master, Creation, US Cutter, Vinyl Express not Q series
Primarily for 4-12 Mil. vinyl.
|
|
|
|
|
|
|
| Roland 45 degree 5 Pack |
5 Pack of the Roland 45 degree blade
|
|
|
|
|
|
|
| Roland 60 degree |
 Solid ultrafine grain carbide tip, brazed to a hardened steel shank.
Fits Roland camm1,Allen Datagraph, Graphityp, CSR ecom-2, Stika, GCC, Master, Creation, US Cutter, Vinyl Express not Q series
Primarily for 12+ Mil. vinyl.
|
|
|
|
|
|
|
| Roland 60 degree 5 Pack |
5 Pack of the Roland 60 degree blade
|
|
|
|
|
|
|
| Roland 60 degree Special 5 Pack |
5 Pack of the Roland 60 degree special blade
|
|
|
|
|
|
|
| Roland 60 Thinned |
Roland 60 thinned. Fits Roland camm1,Allen Datagraph, Graphityp, CSR ecom-2, Stika, GCC, Master, Creation, US Cutter, Vinyl Express not Q series
|
|
|
|
|
|
|
| Roland 60° Special |
Solid ultrafine grain carbide tip, Sharper side angles for use with rhinestone application programs . Fits Roland camm1,Allen Datagraph, Graphityp, CSR ecom-2, Stika, GCC, Master, Creation, US Cutter, Vinyl Express not Q series
|
|
|
|
|
|
|
| Roland 60° Thinned 5 Pack |
Solid ultrafine grain carbide tip, brazed to a hardened steel shank. Thinned to allow for easier passage through thicker foam products. Fits Roland camm1,Allen Datagraph, Graphityp, CSR ecom-2, Stika, GCC, Master, Creation, US Cutter, Vinyl Express not Q series
|
|
|
|
|
|
|
| Summagraphics D Series 36 degree |
Solid premium grade carbide precision ground and polished cutting edge.
|
|
|
|
|
|
|
| Summagraphics D Series 36 degree 5 Pack |
5 Pack of the Summagraphics 36 degree blade
|
|
|
|
|
|
|
| Summagraphics D Series 60 degree |
Solid premium grade carbide precision ground and polished cutting edge.
|
|
|
|
|
|
|
| Summagraphics D Series 60 degree 5 Pack |
5 Pack of the Summagraphics 60 degree blade
|
|
|
|
|
|
|
| Zeta 45 deg |
Solid premium grade carbide with polished cutting edge
|
|
|
|
|
|
|
| Zeta 60 deg |
Solid premium grade carbide with polished cutting edge
|
|
|
|
|
|
|
